Description
ELFTMANN model 3-Gun single stage trigger, right, for AR-15
- Direct match trigger for AR-15 (for frames with MilSpec dimensions)
- Trigger and hammer mounted on aeronautical quality needle bearings (world first).
- No pre-stroke and extremely short overall stroke.
- Hammer equipped with a “half-cocked” notch for maximum safety (the shot can only be fired by deliberate action on the trigger, and not during a shock for example)
- Full power hammer spring for perfect percussion even with NATO primers.
- Modular trigger consisting of a sub-assembly very easy to mount in the frame.
- The module is immobilized in the carcass by two screws which do not require thread locker because 2 counter-locking screws are delivered with the trigger.
- Constructed of A2 tool steel (trigger, hammer, and separator) and aeronautical aluminum (body).
- Adjustable by a screw easily accessible from the top of the frame once the weapon has been dismantled in two.
- Straight trigger, lightened by electro-erosion.
- Dog greatly lightened by electro-erosion, to accelerate the “lock time” that is to say the percussion time.
- Starting weight adjustable from 1.2kg to 1.8kg.
- This trigger, according to its designer, requires no lubrication.
- Compatible with .154” (3.91mm) MilSpec pins, i.e. the vast majority of civilian AR-15s.
- Not compatible with older civilian Colts with .173” (4.39mm) pins.
- Supplied with Allen key and steel plate to be positioned at the bottom of the frame (necessary for polymer frames, optional but recommended on 7075T6 frames)
- Made in USA