Description

2A Armament ultralight rifle – BALIOS-LITE 300BLK 8”
2A Armament is an American manufacturer specializing in ultralight AR-15s and AR-10s. He intelligently modified the external geometry of his carcasses and his receivers so as not to weaken them.
The lightening operations were not limited to the removal of material, but also consisted in modifying the geometry of the zones which undergo the most stress so as not to weaken them. The most striking example is the rear section of the receiver which is stiffer than a normal receiver and thicker in the most stressed area, and this while maintaining a construction in aeronautical alloy type 7075T6 .
Several titanium parts complete the set. The difference in weight, compared to a light conventional model, is enough to completely or largely compensate for the mass of the optical sighting system that will equip the rifle.
The balance and maneuverability of these weapons are simply exceptional and it is enough to have one in your hands to be convinced of this.

• AR-15 type semi-automatic rifle with direct throttle.
• 8” barrel in CrMoV 4150 steel protected by double nitriding (QPQ).
• 1/7” pitch barrel.
• Barrel controlled by magnetic particle inspection.
• The rifling pitch of 1 turn in 7” makes it possible to stabilize all .308″ caliber projectiles, including the heaviest projectiles (220 or 240 grains) intended for subsonic ammunition.
• Gas fret 2A Armament in certified 6AL-4V titanium.
• 2A Armament model X3 compensator in certified 6AL-4V titanium (standard thread 5/8”x24tpi).
• Frame and receiver in 7075T6 aeronautical alloy machined from a block.
• The carcass includes a screw with polymer key to eliminate the possible game which could exist with the receiver.
• The “lower” (the frame) is compatible with AR15 conversions whose dimensions are MilSpec.
• The “upper” (barreled action) is compatible with all AR15 receivers whose dimensions are MilSpec.
• The barrel extension and the breech box feature the M4 type feed ramps.
• Cylinder head in special 9310 steel controlled by magnetic particle inspection, cryogenized and protected by double nitriding (QPQ).
• Type 8620 steel conveyor, protected by double nitriding (QPQ).
• Type 303 stainless steel rear conveyor mass.
• The bolt carrier has an inverted weight distribution compared to a normal carrier (most weight, which is usually above the magazine well, is moved back to the safety level) for better balance.
• Machined steel extractor then protected by double nitriding (QPQ).
• Carrier key protected by double nitriding (QPQ) with crimped screws.
• MilSpec Type III anodizing on frame, receiver, and forearm.
• Armament 2A floating handguard 7” ultra-light equipped with the M-LOK system.
• Certified 6AL-4V titanium barrel nut.
• MFT ”Minimalist” (Mission First Tactical) telescopic stock with an ambidextrous anchorage for ball sling attachment system.
• Buffer H (1 tungsten weight, and 2 steel)
• ALG Defense ACT trigger (polished and nickel-boron coated trigger, polished and nickel-teflon coated hammer).
• Enlarged cocking lever BCM MOD4 (Bravo Company).
• Magpul MIAD pistol grip.
• 2A Armament dismantling pins in certified 6AL-4V titanium.
• The breech retainer is fixed by a BTR screw instead of a pin to facilitate its eventual dismantling.
• Widened and lightened trigger guard, machined in the mass of the carcass.
• Weight: 2090 grams.
• Length: 63.5cm (stock retracted)
• Comes with a 30 round magazine.
• Delivered without sights.
• Caliber: 300 AAC BLACKOUT
• Made in USA (for all component parts)
• Weapon classified in category B2.

Note:
Balios was, along with Xanthos, one of the two horses that pulled the chariot of Achilles, in Greek mythology.