Description

ZEV Ultimate Kit, Fulcrum trigger for Glock Gen3 cal.9×19 (black safety)
(compatible with Glock Gen3 models 17, 17C, 17L, 19, 19C, 26, 34)
ZEV Technologies is an American manufacturer specializing in match-grade parts to upgrade Glock pistols.

The ZEV Fulcrum match trigger is one of the greatest upgrades a shooter can make to their Glock. This trigger currently holds several world records, notably in the Steel Challenge.
It is recommended for sports shooting disciplines, but also for any amateur wishing to improve his results on target. It mounts easily using a simple pin punch.

• Pre-stroke and overall stroke are adjustable.
• The starting weight can go down to around 1360 grams.
• The trigger is machined from a block of 6061T6 aircraft alloy with Type III anodization.
• The steel trigger bar is polished and its geometry is modified.
• The front face of the trigger is flatter and the trigger safety is 3 times wider than the original one to greatly improve the regularity of positioning of the index finger as well as its comfort.
• This trigger makes it possible to feel the reset of the separator more clearly, allowing the 2nd shot to be chained more quickly.
• Polished, stainless steel firing pin safety.
• Lightweight V4 connector (separator).
• The “DROP-IN” kit includes the trigger, ejector block, trigger spring, lightened V4 connector, polished firing pin safety and 2 lightened firing pin springs (2 and 3 pounds).
• The “ULTIMATE” kit additionally includes the lightened ZEV firing pin, in polished stainless steel, which has a tip slightly longer than the original firing pin to avoid incidents of percussion with hard primers. Its mass being lower, it also reduces the time of percussion, which is favorable to precision.

Notes:
– although its installation is easy, it is advisable to have this trigger installed by a qualified gunsmith.
– when ordering, specify which version you want: “Drop-In” or “Ultimate” (see the description above and the price on the corresponding sheet).

CAUTION: the screws, set in the factory, are glued with a weak threadlocker, and it is necessary to heat them before attempting any modification of the initial settings.